3.0mm,4.5mm, 8mm,10mm,13mm,16mm (standard two catridage)
5000 Piece/Pieces per Month
Packaging & Delivery
pack with standard exported box
1 - 10
To be negotiated
Portable 4d 3d Hifu with 5 cartridges 11 lines body and face lifting skin tightening wrinkle removal body contouring machine
1. 3D HIFU machine with 11 lines per shot
2. Standard cartridge: 1.5mm/3.0mm/4.5mm/8.0mm/13.0mm
3. Each cartridge has 10000 shots
High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime.
This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights.
Body FAT REMOVAL
Apply high intensity focused ultrasound, generate focused energy and go deeoer into the cellulite to break cellulite. it is an invasive, impressive and long- last effective tratement to reduce fat, especially for abdomen and thigh.
High intensity focused ultrasound target at fat of 13mm(depth of penetration), heating up the fat tissue, combine with high energy and good penetration to resolve the fat, during the treatment, the triglyceride and fatty acid excrete by the process of metabolism, and the vessal and nurve will not be damaged.
Standard: machine with 2 cartridges, if need more cartridges, can buy extra cartridges for body .
The transducer information:
1. Transducer DS-4.5mm, 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming “heat coagulation” regional,
targeted to thicker skin, such as cheeks, etc.
2. Transducer DS-3.0mm, 4MHz frequency ,used to release ultrasound energy into the dermis layer of 3.0mm,is responsible for activating the skin’s dermal layer of collagen, effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles.
3. Transducer DS-6.0mm,8.0mm,10mm,13mm and 16mm are responsible for transmitting 4 MHZ high intensity focused ultrasound subcutaneous fat layer to melt the fat cells. Then the metabolites of fat cells will be excreted by human body’s metabolis.It is targeting the body.
Note: DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is ONLY do for body fat reduction, skin tightening.
1. It uses the latest advanced technology called HIFU, short for high intensity focused ultrasound.
2. It has three different working heads for different operational areas:
-3.0mm is for the dermis layer;
-4.5mm is for the SMAS layer.
-6.0mm/8mm/10mm13mm/16mm for body fat layer
3. It's totally non-invasive and safe.
4. The effect will be shown after the operation, while the best effect will be seen after two months. It can be lasted for 2-3 years.
1. Remove wrinkles on around forehead, eyes, mouth, etc.
2. Lift and tighten both cheeks skin.
3. Improve skin elasticity and shaping contour.
4. Improve jaw line, reducing “marionette lines”
5. Tighten the skin tissue on forehead, lifting the eyebrows lines.
6. Improve skin complexion, making the skin delicate and bright
7. Match with injecting beauty like Hyaluronic acid, collagen, to resolve more aging problem
8. Remove neck wrinkles, protecting neck aging.
1.Clean the Skin.
2.Take a photo before treatment , and paint on the preoperative lifting location with make - up pencil .
3.According to the skin thickness to select appropriated transducer (Tranmitter) .
4.Set suitable input intensity ( such as1.0-1.5J ) , focal length and spacing ( such as 1.5mm)
5.Applying ultrasonic plentiful gel as couplant between transducer and skin.
6.face lifting operate on the note of power line, forming a line thermal condensed node in the specified depth under skin when the transmitting button is pressed per time,operating continued on the powder line until the specified location transmission is completed. The treatment parts such as face, chin and both sides of neck.
7.don’t operate on marginal mandibular nerve and supra or bital nerve.
8.no recovery period after treatment,daub some moisture product and make up immediately.
9.only once, the comprehensive effect will gradually appear in two or three moths,Some people may do this treatments several times.
Sunwin adhere to the route of machines' OEM,ODM,development and production,No matter medical equipment,beauty equipment,or high-tech equipment,as long as the industry sales elite compeny required technical ancilary equipment research and development production tasks to SUNWIN,our R&D team start it,Then,with the shortest time and the best technology,we will put the research and development production and the best technology equipment to the industry sales alite company, help to form a unique marketing finally,we do R&D production,you do marketing!